Specifications

TecMaster

  • Methods: Roll, Slot Die, Knife
  • Coat Width: 6” (150 mm)
  • Web Speed: 0.3 to 6.6 fpm (.1 to 2 mpm)
  • Web Width: 2” to 6.9” (50 to 175 mm)
  • Core Size: 3” (76 mm)
  • Cure/Dry: 3’ (1 m) Convection Dryer @ 350 F max. (177 C)
  • Laminate: Dry Bond to 80 PLI (9 N/m)

LabMaster

  • Methods: Roll, Rod, Slot Die, Knife
  • Coat Width: 11.8” (300 mm)
  • Web Speed: 10 to 100 fpm (3 to 30 mpm)
  • Web Width: 4” to 14” (100 to 356 mm)
  • Core Size: 3” and 6” (76 mm and 152 mm)
  • Cure/Dry: Two Zone 20’ (6 m) Convection Dryer @ 350 F max. (177 C), post dryer UV @ 400 W/in (16 W/mm)
  • Laminate: Dry and Wet Bond to 80 PLI (9 N/m)

Main Pilot Line

  • Methods: Roll, Rod, Comma, Knife, Slot Die, Hot Melt
  • Coat Width: 24” (600 mm)
  • Web Speed: 10 to 2000 fpm (3 to 610 mpm)
  • Web Width: 6” to 24” (150 to 600 mm)
  • Core Size: 3” and 6” (76 mm and 152 mm)
  • Cure/Dry: Three Zone 60’ (18 m) Convection Dryer @ 600 F max. (315 C), UV @ 600 W/in (24 W/mm), Electron Beam, IR
  • Laminate: Dry and Wet Bond to 90 PLI